PDA

View Full Version : Just Joined...

Highland3r
10-12-2007, 01:07 PM
Hi guys,
Decided it was time to sign up (bored at work..) so hey all!

Not really up to speed on whats hot and whats not anymore, so probably can't offer as much as I'd like but will try!

Please be gentle and excuse nubness which will no doubt spill from my keyboard!
K404
10-12-2007, 01:09 PM
Hey Andy :D About time you joined up :D
Stocky
10-12-2007, 01:13 PM
Hey! Welcome to the Fourms! :)

I was wondering when you would show up... Do you have any benching plans? :biggrin:
sacha35
10-12-2007, 01:13 PM
Hi Mate long time know see,Great to have you here on this site.
Highland3r
10-12-2007, 01:29 PM
Hey! Welcome to the Fourms! :)

I was wondering when you would show up... Do you have any benching plans? :biggrin:

At the moment no.

Sold a lot of kit lately (phase and waterchiller) DICE pots are going after crimbo too so all the sub-zero kit is gone now. Just don't have the time to get stuff done, and space is really quite tight in the new flat.

Might get back into benching in the middle of 08, will have to see how things pan out on that front. Have some unfinished business with the 6300 though, would love to get it properly frozen and see if she'll hit over 630FSB.
Johnny Bravo
10-12-2007, 01:44 PM
HE RETURNS!

glad to see you've taken the first step andy :D

So what's the story behind this 6300 then?
Highland3r
10-12-2007, 01:50 PM
HE RETURNS!

glad to see you've taken the first step andy :D

So what's the story behind this 6300 then?

Basically its a pretty decent chip. 100% OC on stock cooler (afaik)
And 4.2ghz (600FSB) pi 1m stable under phase. Also pi 32m stable @ 490 FSB. Both with ~ 1.57v (this was just set and run, will probably do the same speed with less voltage)

Want to get her to 630FSB (which afaik is somewhere near the WR). When I last looked, people were running 1.6+v through their chips under DICE/LN2 to get to 600 FSB so this little-un seems above average.

<edit> and 3.74ghz prime stable under water @ 1.4v </edit>
maverik-sg1
10-12-2007, 02:08 PM
Duuuuude,

Good to see you here at last - enjoy your stay and switch your bench team on hwbot to bench tec uk - if u feel the urge :)

Mav
bazx
10-12-2007, 02:59 PM
welcome to the firm:p
elfy
10-12-2007, 03:03 PM
<edit> and 3.74ghz prime stable under water @ 1.4v </edit>

**** me, higher clock, lower voltages than my 6400, you must be a proud daddy of that ickle chip
Stocky
10-12-2007, 03:04 PM
Might get back into benching in the middle of 08, will have to see how things pan out on that front. Have some unfinished business with the 6300 though, would love to get it properly frozen and see if she'll hit over 630FSB.

Around the time of the Forum Wars I see! :cool:

...and it looks like you have yourself a very nice chip there :)
Thickbrit
10-12-2007, 07:47 PM
Ah,long time no see.It's good to have you here mate.
vento1
10-12-2007, 09:37 PM
Welcome to the team.
Animal
11-12-2007, 02:05 PM
Welcome fella
blindfitter
11-12-2007, 04:27 PM
Good to See you here,