LittleDevil's GPU Pots

[LittleDevil]

Hey guys, here are new GPU pots from me. Monting holles are for R600 and G80. Pot is really masive copper part has about 700 grams. More pics soon.

Here are some pics:

http://ld-phasechange.com/images/LN2_container/GPU/1.jpg

http://ld-phasechange.com/images/LN2_container/GPU/6.jpg

http://ld-phasechange.com/images/LN2_container/GPU/5.jpg

http://ld-phasechange.com/images/LN2_container/GPU/8.jpg

http://ld-phasechange.com/images/LN2_container/GPU/9.jpg

Best Regards

[LittleDevil]

Full issulation on it:

http://ld-phasechange.com/images/LN2_container/GPU/10.jpg

Regards

[Thickbrit]

That's very nicely done,yet again.Would have been nice to see some insulation idea's for the mounting plate though,but i'm sure that will be easy enough to a resourceful modder/bencher.

[Zaltan]

700 GRAMS!!!! thats crazy, I'm amazed video cards can put up with stuff like that. Awesome work LittleDevil.

[LittleDevil]

Complete POT has 920g with mounting. :biggrin:

Regards

[Stocky]

Complete POT has 920g with mounting. :biggrin:

I assume you have to take a bit of care when mounting then, especially as it's one side heavy!

[Dualist]

If it the right height you can rest the base on the pci slots or atleast wedge something under it. :D

[LittleDevil]

Internal pics:

http://ld-phasechange.com/images/LN2_container/GPU/11.jpg

Regards

[Johnny Bravo]

Ohhh looking good. Need to make a blanking plate support to use these tho :D Any tests done yet LitteDevil?

[LittleDevil]

Not yet, got them yesterday.

regards

[Johnny Bravo]

Then I look forward to seeing how it goes ;)

[LittleDevil]

8800GTX mounting:

http://ld-phasechange.com/images/LN2_container/GPU/12.jpg

On the back side:

http://ld-phasechange.com/images/LN2_container/GPU/13.jpg

Full view:

http://ld-phasechange.com/images/LN2_container/GPU/14.jpg

Issulated:

http://ld-phasechange.com/images/LN2_container/GPU/15.jpg

http://ld-phasechange.com/images/LN2_container/GPU/16.jpg

http://ld-phasechange.com/images/LN2_container/GPU/17.jpg


Best Regards

[LittleDevil]

On the bottom:

http://ld-phasechange.com/images/LN2_container/GPU/18.jpg

Regards

[Johnny Bravo]

looks great LD, I was wondering, would it be possible to get it with a shorter Aluminum section? Maybe even just a screw on section of piping?

[Stocky]

...to get it with a shorter Aluminum section?

*passes hacksaw* :biggrin:

[LittleDevil]

I only have those on stock right now. Why do you need shorter one?

Regards

[Johnny Bravo]

*passes hacksaw* :biggrin:

well I wasn't going to be the first to say it :D

[LittleDevil]

First frosty pics:

http://ld-phasechange.com/images/LN2_container/GPU/19.jpg

Regards

[K404]

700 GRAMS!!!! thats crazy, I'm amazed video cards can put up with stuff like that. Awesome work LittleDevil.

LOL thats nothing- my GPU Mousepots are 1.9Kg each....! :D

LD_ Nice work, but the bottom wont be able to fight off much condensation- the insulation isnt thick enough, but I appreciate because of the PCI slots, thats the hardest part.

[LittleDevil]

Yes but you need to know that your Mousepot is made full of copper and that is a big difference. From bottom GPU pot to PCI is about 15mm space and i think that i enough for issulation. Remember i made those pics only to see how it looks like and not for benching/testing!

Regards

[Johnny Bravo]

I only have those on stock right now. Why do you need shorter one?

Regards

just for ease of use if it were used for dry ice, a long rod tends to be harder to stir up the dry ice/acetone slurry at the bottom, but hey, I could always just cut it myself ;)

[K404]

drumsticks and crossbow bolts work for me :)

[Johnny Bravo]

drumsticks and crossbow bolts work for me :)

must have a stronger wrist than me :D

[Thickbrit]

must have a stronger wrist than me :D

Ahahaha :lol:

[K404]

must have a stronger wrist than me :D

I could slap you to prove it? :p

[Johnny Bravo]

ahh save your strength for the stirring!

[K404]

Looks like you're the one stirring it, not me! :D

[Raja]

is this where the quote "slap my top!", that I see on the back of dirty vans comes from?.. Strong wrist-ed adolescents hitting each other in strange places?

[LittleDevil]

Here is container for cards with shim around the core, like HD2900series.

http://ld-phasechange.com/images/LN2_container/GPU/22.jpg

http://ld-phasechange.com/images/LN2_container/GPU/21.jpg

Regards

[LittleDevil]

First set goes to Germany:

http://ld-phasechange.com/images/LN2_container/GPU_set/1.jpg

http://ld-phasechange.com/images/LN2_container/GPU_set/2.jpg

Regards

[LittleDevil]

Here are some pics of sets:

http://ld-phasechange.com/images/LN2_container/GPU_set/3.jpg

http://ld-phasechange.com/images/LN2_container/GPU_set/4.jpg

http://ld-phasechange.com/images/LN2_container/GPU_set/5.jpg

Regards

[Teknokid]

wow, i think i just wet myself :S

[weescott]

Recieved my SLI/CF set today:
http://www.weescott.co.uk/images/GPU_pot.jpg

http://www.weescott.co.uk/images/GPU_pot_2jpg.jpg

Inside the pot:

http://www.weescott.co.uk/images/GPU_pot_3.jpg

mounting:

http://www.weescott.co.uk/images/GPU_pot_4.jpg

On an 8800GTX:

http://www.weescott.co.uk/images/GPU_pot_5.jpg


Thanks Little Devil

Now, what to test on first. V modded 8800GTX or 3870 CF :p

[Azza]

Nice. :)


We going to see some action of them before your meet?

[sacha35]

Nice. :)


We going to see some action of them before your meet?


I think you will find this has been coverd by baz http://www.benchtec.co.uk/forums/showthread.php?t=468

[RaiderX303]

hehe i also got my pair today altho i can only use one until my 2nd card comes back from RMA.

http://i116.photobucket.com/albums/o8/RaiderX303/Image015.jpg
Just insulated


http://i116.photobucket.com/albums/o8/RaiderX303/Image017.jpg
Mounted on P35-DQ6

[Teknokid]

2nd card on p35?

[RaiderX303]

2nd card on p35?

my 2nd 3870, theres still a big performance boost.

[Teknokid]

sorry, i though it was a gtx :( my bad..
Nice set up :)

[LittleDevil]

Guys, LD GFX-R1 SLI fits on 8800GTX without any problem. ;)

http://ld-phasechange.com/images/LN2_container/SLI/1.jpg

http://ld-phasechange.com/images/LN2_container/SLI/2.jpg

http://ld-phasechange.com/images/LN2_container/SLI/3.jpg

http://ld-phasechange.com/images/LN2_container/SLI/4.jpg

http://ld-phasechange.com/images/LN2_container/SLI/5.jpg

[LittleDevil]

http://ld-phasechange.com/images/LN2_container/SLI/6.jpg

Best Regards

[Teknokid]

WOW that is super nice, can i ask why youve done that though? is that just an example or have you got sli on inteL chip?

[Cupra]

WOW that is super nice, can i ask why youve done that though? is that just an example or have you got sli on inteL chip?

lol..

[LittleDevil]

Forgot to post pics of balckplates:

http://ld-phasechange.com/images/LN2_container/GPU/24.jpg

Different design :P

http://ld-phasechange.com/images/LN2_container/GPU/25.jpg

Regards

[LittleDevil]

New batch of LD GFX-R1

http://ld-phasechange.com/images/LN2_container/GPU/26.jpg

http://ld-phasechange.com/images/LN2_container/GPU/27.jpg

Best Regards

[phem0r]

Nice work LD, you gonna be making pots for cards like 9800GX2..?

[Teknokid]

thats got to be extremely difficult if not impossible.

[RaiderX303]

thats got to be extremely difficult if not impossible.

not impossible ;)

http://xtreview.com/images/kingpin%20%20GeForce%209800%20GX2%20xtrem%20oc%200 1.jpg

[Teknokid]

Geez... nice!