Hey folks, I'm new here :)

[I.L.P]

Got bored of XtremeSystems and started looking for UK forums and found this place, hopefully make it my new home :)

Heres my first overclock to break me in on these new forums :D

http://millionuk.com/images/thumbs/zmteyw34zl44dznmwjyz.jpg (http://millionuk.com/gallery.php?entry=images/zmteyw34zl44dznmwjyz.jpg)

P5K Vanilla
E6850 ES
Crucial Bolloxstix 8500's

Cheapo poor quality watercooling :)

little bit more, look at the memory bandwidth :D

http://millionuk.com/images/thumbs/zhi3nnzjq2mkjxqjmyzw.jpg (http://millionuk.com/gallery.php?entry=images/zhi3nnzjq2mkjxqjmyzw.jpg)

[H4rdcore-HeaveN]

Welcome to the forums bud hope you enjoy them good help and info here you cant go wrong :)

[Barron_Greenback]

Sweet mate, and welcome! Can you bench that at 540mhz fsb!?

[I.L.P]

and some pi, not exactly extreme i know, but not bad for a newbie? :p
http://millionuk.com/images/thumbs/myg02dzm21mfynqzxqym.jpg (http://millionuk.com/gallery.php?entry=images/myg02dzm21mfynqzxqym.jpg)

[I.L.P]

Sweet mate, and welcome! Can you bench that at 540mhz fsb!?

Yeah, that reminds me, time to get the 3dmark out! put this G92 8800GTS to the test!

[I.L.P]

Here ya go, i've gone one better, benched at 550 FSB, Graphics card is on stock cooler by the way, not insane performance but it will do for now :)

http://millionuk.com/images/thumbs/0n0acjeodxtyzzzknddu.jpg (http://millionuk.com/gallery.php?entry=images/0n0acjeodxtyzzzknddu.jpg)

if only i had the cash for a Vapochill LS, would get some decent clocks then :(

sub 13sec pi run, 565 FSB, 4ghz next?

http://millionuk.com/images/thumbs/tmxhmemmy4ro2mz0wm2z.jpg (http://millionuk.com/gallery.php?entry=images/tmxhmemmy4ro2mz0wm2z.jpg)

[H4rdcore-HeaveN]

Some nice clocks here bud keep them comming :) Nice ram you have there im going to pick up some Crucial Ballistixs PC5300.

[I.L.P]

4Ghz club newest member, my first ever! :D

http://millionuk.com/images/thumbs/3ytnmwgtnqjwajoioytq.jpg (http://millionuk.com/gallery.php?entry=images/3ytnmwgtnqjwajoioytq.jpg)

[I.L.P]

thanks for the encouragement folks, never got this over at XS lol :)

[H4rdcore-HeaveN]

You will get plenty of it here ;) Keep the clocks comming cause you got 4ghz doesnt mean you can stop :)

[I.L.P]

prime fails immediately at 4ghz, need to get some more liquid pro instead of using AS5 :D

[H4rdcore-HeaveN]

prime fails immediately at 4ghz, need to get some more liquid pro instead of using AS5 :D

AS5 does the damage whats the difference between these 2?

[Stocky]

Hello and welcome to the forums :)

Congrats on the clocks! - I remember my first 4GHz, but that was on phase some time ago!

What VCore are you running through that?

[Thickbrit]

Hello,enjoy your stay.

[jabski]

welcome :)

[sparkY1000]

Welcome to the forums!

Nice clocks! Looks like your enjoying yourself :D

[scooter.jay]

Welcome to the forum lots of sound advice to be had enjoy:biggrin:

[Cupra]

hello and welxome

[weescott]

Welcome. Now go get some points on HWbot for the team ;) :p

[S3r3nity]

hey, welcome fella!

[maverik-sg1]

I think I said it in the thread where you first posted - Hi and welcome, I hope you enjoy ure stay.

[I.L.P]

AS5 does the damage whats the difference between these 2?

About 6C :D liquid pro is actual liquid metal, like mercury but is hyper conductive, pain in the backside to apply and remove though, but well worth the effort. only to be used on copper though, NO ALUMINIUM! :no: will weld your cooler to the CPU.



What VCore are you running through that?

1.6125 set in Bios but is 1.586 actual, and vdroop is about 0.008 so 1.578 under heavy load, pecil mod really helped the vdroop on the board, is a killer board now :)

What a welcome from everyone! thanks muchly, feel alot more wanted than on XS :cool:

[vento1]

Welcome to benchtec perhaps you could do us a guide on using liquid pro and where to get it from, is it any good sub zero.

[I.L.P]

aparrently it's no good at sub zero temps because it solidifies or something, but theres reports about that it solidifies after 2 days anyway so someone should test this, not on phase myself so i can't.

can show people how to apply it though no probs, got 2 syringes of the stuff coming tomorrow, should have my lapping kit and other stuff soon too, then need a nice long day off to get it all sorted out.

*edit* it's always seems to be in stock at www.watercoolingshop.com and they're a UK site.

[vento1]

Thanks for that i think i will get some for the upcomming forum wars.