+ Reply to Thread
Page 4 of 4 FirstFirst ... 2 3 4
Results 46 to 56 of 56

Thread: SUCTION LINES by piotres :-]

  1. #46
    Forum Member
    Join Date
    Dec 2009
    Location
    West Midlands UK
    Posts
    114

    Default

    Quote Originally Posted by 4Qman View Post
    Peter does the evap hold load better than the previous generation of evaps such as the Chilly1, its been a while so just seeing if there has been any changes.

    Nice work as always
    his are bigger i think, so you get more mass and better coverage of the cores on 6+ core CPU's.

    Quote Originally Posted by Greed4Speed View Post
    Yes he makes great linesets, very difficult to make, I should know as I've also made one, peter's one's are very good quality, you should buy one
    haha, too right.

    tbh any evaps i need for future builds will be a piotres evap for sure

  2. #47
    Stock Air cooling Wellcomef3-a's Avatar
    Join Date
    Jul 2008
    Location
    Halifax, UK
    Posts
    20

    Default Felixible suction line

    Dzien dobry Piotres, jak sie masj? Did I get that right? My spoken Polish is a Mega or even a Giga improvement on the non-verbal version of the language!

    How much are the flexible suction lines and do you have one the same length as the stock length of the suction line on a Mach II GT? Do you sell just the bare units without insulation & braiding and hold-down kit? I may need to make use of your services shortly as I'm having a mod done to my Mach II GT.

    Send me a PM if you think it inappropriate to display prices online, OK!

    Dziekuje i dobranoc.

    Peter
    DFI Lanparty UT NF4 SLI Expert
    AMD Opteron 148 'Naked'
    nVidia GeForce 8800GTX
    2GB GSkill PC4000 RAM
    Lian-Li PC7077
    PC Power & Cooling 510 SLI
    NEC ND2500A DVD-RW
    4 X WD 36GB Raptors RAID 0
    Evercool VC-RE
    Samsung 160GB
    Sunbeam Fan Controller
    AquaXtreme AQX-50Z-DC12 Pump
    AquaXtreme MP05-SP-LE CPU Block
    DD 8800GTX Full Cover Waterblock
    Thermochill PA120.3
    Panaflo FB12G12H-1BX Fans
    Alphacool 5 1/4" Aluminium Bay Reservoirs x 3
    Tygon 1/2" ID x 3/4" OD Tubing
    Double Wire Hose Clamp

  3. #48
    Phase Guru piotres's Avatar
    Join Date
    May 2008
    Location
    Poland/ Warsaw
    Posts
    338

    Default

    Twój Polski jest quite good ;-P.

    Sure I sell also suction lines without insulation. But I don't use non braided flexible hoses - they aren't such "heavy duty" as braided ones, and it's easy to damage them IMO.

    PM sent .

  4. #49
    Phase Guru piotres's Avatar
    Join Date
    May 2008
    Location
    Poland/ Warsaw
    Posts
    338

    Default

    One more, this time for GPU, with new powdercoated, metal enclosure :

    Together with brazed 54mm CPU evaporator.








  5. #50
    Phase Guru piotres's Avatar
    Join Date
    May 2008
    Location
    Poland/ Warsaw
    Posts
    338

    Default

    Just to inform that I'm still alive














  6. #51
    Phase Guru piotres's Avatar
    Join Date
    May 2008
    Location
    Poland/ Warsaw
    Posts
    338

    Default

    Still making suction lines, but rarely. People have almost stoped making or buying phase-change units .

    One suction line made in October 2012.






  7. #52
    Forum Member almighty15's Avatar
    Join Date
    Oct 2011
    Posts
    180

    Default

    Quote Originally Posted by piotres View Post
    Still making suction lines, but rarely. People have almost stoped making or buying phase-change units .
    Problem now is that you can pretty much max a modern CPU out on water cooling, making Phase a bit pointless.

  8. #53
    Stock Air cooling
    Join Date
    Sep 2012
    Posts
    1

    Default

    Quote Originally Posted by almighty15 View Post
    Problem now is that you can pretty much max a modern CPU out on water cooling, making Phase a bit pointless.
    dont say that

  9. #54
    Phase Guru piotres's Avatar
    Join Date
    May 2008
    Location
    Poland/ Warsaw
    Posts
    338

    Default

    GPU suction line from November 2012, but not posted till now :













    Polished copper looks quite bad on those photos, but in real it was better .

  10. #55
    Sponsored by Stannah maverik-sg1's Avatar
    Join Date
    Nov 2007
    Location
    Redditch, UK
    Posts
    9,500

    Default

    Still a true craftsmen - lovely work Peter


    Former HWBOT and CPC World No1 Bencher

    http://www.hwbot.org/user.do?userId=5051

    HWBOT Quote:

    (highest rank ever: 1st at 05 Nov 2006 12:30, most hwboints ever: 331.7 points at 05 Nov 2006 12:30)

    Voltage - The solution and cause of all your overclocking problems .

    Please forgive my grammar and spelling - My Keyboard is dyslexic

  11. #56
    Phase Tech Greed4Speed's Avatar
    Join Date
    Nov 2007
    Location
    London
    Posts
    1,382

    Default

    Another nice evap.

+ Reply to Thread

Similar Threads

  1. LittleDevil's Suction Lines
    By LittleDevil in forum Single Stage Cooling
    Replies: 3
    Last Post: 09-09-2010, 04:03 PM
  2. piotres' silver NL11F SS
    By piotres in forum Single Stage Cooling
    Replies: 13
    Last Post: 23-10-2008, 08:49 AM
  3. Welcome piotres :)
    By jabski in forum News Room
    Replies: 18
    Last Post: 26-05-2008, 01:31 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts